AOSION® Ultrasonic Solar Animal Repellent For Cat Bird Dog Fox AN-B030N-1

 

Step 1. When using the device for the first time, please use the device till power to the lowest (built-in batteries): the red low-voltage indicator will keep blinking or there is no reaction after turn-on the device.

Step 2. Use a standard Type-C cable to connect the device to a power source, charge the device for 6-12 hours:
 2.1: Because of the different power and voltage output by different chargers and different activity of batteries, it's normal that the red indicator may keep flashing after charging for more than 12 hours (the device could be used normally even charging is stopped), please just install the device in a normal usage scenario and use it would be OK.
 2.2: If the charging time is significantly less than 6 hours, but the indicator kept light up (showed charging finished, not flashing), please continue to charge for at least 6 hours.

Step 3. If the red indicator keeps flashing or device stop working without any response after using for some time, please repeat Step 2., charge 6-12 hours, after 3-5 cycles of charge and discharge, the charge and discharge characteristics of the batteries would be stable and the charging index tends to be back to normal.

Step 4. Please follow the three Steps above to enable the batteries in the device to maximize its best performance.
Please take out the batteries if you won't use the device for a long time or recommend to replace three 1.2V AA rechargeable batteries (replace with Ni-Cd or Ni-MH rechargeable batteries).